Marble Stone has always been a popular building material and has received rave reviews in the field of space decoration. But in recent years, there has been a wave of sintered stone in the industry. As the concept of sintered stone has frequently entered the public's field of vision, it has become a new favorite in the building materials industry. What is the difference between marble and sintered stone? 1. Different origin and appearance Natural marble is a gift of nature, so the texture of each piece is unique. The texture of high-quality stone is clear, smooth and delicate, and the color is rich and varied. The sintered stone is industrially processed, so the appearance of the same slab is highly consistent, although the texture is close to natural stone. However, the varieties of sintered stone on the market are relatively simple, with black, white and gray as the main color. 2. The composition of the component is different Marble is mainly composed of calcite, limestone, serpentine and dolomite, and its main components are calcium carbonate (over 50% in total), magnesium carbonate, calcium oxide, manganese oxide and silicon dioxide. Sintered Stone is made of natural raw materials (silicon dioxide, inorganic clay, feldspar powder) through a special process, pressed by a press, and fired at a high temperature above 1200 °C. 3. Different physical and chemical properties Marble is mainly composed of calcite, limestone, serpentine and dolomite, and its main components are calcium carbonate (over 50% in total), magnesium carbonate, calcium oxide, manganese oxide and silicon dioxide. Sintered Stone is made of natural raw materials (silicon dioxide, inorganic clay, feldspar powder) through a special process, pressed by a press, and fired at a high temperature above 1200 °C. Hardness: The Mohs hardness of marble is 2.5-5, the texture is dense but the hardness is not large, and it is easy to process, carve and smooth, polish, etc.; The Mohs hardness of the Sintered Stone is 6-7, which is wear-resistant, scratch-resistant and impact-resistant, and vegetables can be cut on the slate without damage. Stability: Marble has stable physical properties and meticulous organization. The impacted grains fall off, and the surface has no burrs, which does not affect its plane accuracy; the material is stable, which can ensure long-term deformation, small linear expansion coefficient, high mechanical precision, anti-magnetic, insulation, non-magnetization, It can move smoothly during measurement, without stagnation, not affected by moisture, and the plane is stable. The Sintered Stone has high stability, is durable, does not change color, and does not deform. Marble VS Sintered Stone, who wins? Let's take a look tog...
Because stone products is a heavy and bulky product, special attention should be paid during the packaging, transportation and storage, and professional methods in the stone industry should also be taken. How to effectively pack, transport and loading stone products? ●According to the characteristics of stone product types, we manufacture plywood crate, solid wooden crate, wooden bundles, etc. according to the standard of wooden products for packaging. ● Only products that have passed the final inspection of the Quality Control Department can be packaged. ● Count the number of products belonging to the crate number according to the packing list, clean up the products, and then visually inspect the appearance quality of the products. If any problems are found, they will be returned to the quality inspector and the workshop, and they will be re-manufactured in time. ● During the packing process, please handle with care to avoid damage; all products waiting to be packaged should not directly touch the ground, but must be bottomed with rubber pads or wooden strips. ● After the product is packed according to the packing list, the packing worker should make detailed records, and the packing can be sealed only after the quality inspection worker confirm and sign. ● Clean up the packaging site immediately as soon as packing finished. The packaging of stone products: In terms of the packaging of stone products, the export requirements are generally fumigated wooden crate packaging, the stone tiles/slabs are required to be placed vertically, two pieces polished sides face other, the smooth surfaces are separated by foam, and the surrounding areas are wrapped in foam. The stone in the wooden crate is first bundled with straps. Packing tape outside the box. If it is thin tile, it is usually packed in a foam box first, and then packed in a wooden crate. Wooden crate should be equipped with iron waistbands at both ends of each crate, and iron-clad corners should be added to the rungs. Straw rope packaging can wrap the smooth-faced plates with straw ropes with a diameter of not less than 10mm along the length and width directions in sequence, and bundle them firmly. In addition, the straw rope can also be bundled in a "well" shape, and each bundled point should not be less than 3. After the stone is packaged, the number of crate, specification and quantity should be marked on the package. Engineering cut-to-size stone packing ● Wooden crates made of standard wooden boards, wooden squares and other materials. In principle, products of the same or similar specifications are packaged together, and each wooden crate has a load of no more than 1.5 metric tons. In special cases, it can be packaged according to customer requirements. ● Only products that have passed the final inspection of the quality inspection department can be packaged and must be handled with care during the...
Natural stone is rich in color, a lot changes, and delicate in texture,especially for natural marble stone. It is the charm of trillions of years' accumulation, and it is the original picture that nature has given us.In the past few decades, people with "obsessive-compulsive disorder" really didn't have much affection for color difference. Many people like a regular, single and simple design. When encountering the stone color difference, people are always eager to eliminate the color difference, or hope to choose a stone with less color difference. However, there is no two identical stones in the world. Because of this, the natural color difference will decorate the architectural space with more personality. But to designers, the stone with color difference is actually a treasure. Color difference engineering is the highest art in nature. The bigger the color difference, the more precious it is. Make good use of the color difference, and the whole space will bloom with a different style.Many people think that the materials used are of poor quality. In fact, this is a misunderstanding of stone materials. How is the color difference of natural stone formed? The reason why natural stone has "color difference"? Reason 1: Surface mines and deep mines Stone is mined from the quarry mine, from top to bottom, from outside to inside. Under the natural environment, the outer layer of stone is more exposed to water, air and sunlight.The stone hidden deep inside, there is no such environment. Therefore, there is a general difference in the color of surface and deep layers.After the deep layer is mined, the stone will also change in a new environment such as sunlight, air, and water, resulting in differences in color. Reason 2: Uneven mineral content The base substance of marble is calcium carbonate. In addition to the basic minerals, various elements and minerals are mixed together to form the ever-changing colors and textures of the stone. Take the stone materials of South America as an example. The geological movement in South America is strong, and the underground is rich in copper ore, iron ore, and various metal minerals. Therefore, the stones produced in South America usually vary greatly in texture and are rich in color.For example,Granite from Brazil is almost with changing big veins. The distribution of various minerals in nature is uneven, otherwise humans would not need to explore for minerals. This unevenness results in differences in the color of the stone. Reason 3: The methods of mining and processing are different The stone mined from the quarry is usually a whole block, and the block needs to be cut into pieces, which are called stone slabs. In the processing of blocks, there are different cutting directions. This kind of processing difference cannot be completely avoided even if careful attention is paid during stone processing, and there will be more or less differences in the sl...
Artificial quartz slab,New design colors,High Quality ,Excellent Service from Xiamen Excellent Stone.Waterproof and oil-proof/Nice selection/ International standard. Buy New Design Artificial Quartz Stone Slabs With Factory Price For Hotel Countertop, Chinese high quality and cheap New Design Artificial Quartz Stone Slabs supplier and manufacturer. Xiamen Excellent Stone is currently launching six new designs of quartz slab into the list.Pls check out the newest design of quartz slabs from Excellent Stone,these will be in the top list of popularity of quartz slab in the market. All these slabs need very sophisticated experience.And the last two is highly welcomed by Mexico market.We believe our products,believe in ourselves,we also believe we can help you to get what you need. What is the maximum size of a quartz slab? The max sizes of slabs quartz is 3230*1630MM=127"*64",total 5.12M2 will be charged for each piece. Thickness both 20mm&30mm. Welcome to ask for free samples. For more colors,pls check our quartz color collections page. We sincerely hope that in 2022 and in future, I will pursue excellence with you! Looking forward to working with you to create a new world in the quartz stone industry! #excellentstone #quartzslabs #quartzfactory #quartzsuppliersconnie@excellentstone.comwhatsapp/tel: 0086 185 5925 6353
Let's talk about the questions on steel rods as below. Why should the stone be reinforced with steel rod? What is the function of the steel rod on the back of stone? What material is used for the steel rod? What is the main reason for the re-rust lesions of steel rods? What are the technical requirements for marble steel rods? Steel rods inserts into the back of Stone, refers to the back of marble (usually marble needs to be back rib), slotting and adding steel bars is a way to strengthen marble to avoid marble breakage. After the stone is cutted into sizes, the thickness is very thin and it is very easy to break. In order to increase the strength of the stone, try to ensure that the stone is not broken during processing, transportation and installation, so as not to affect the overall beauty. What material is used for the steel rod? The materials of bar rods are iron, galvanized, stainless steel, copper, aluminum alloy and fiber. They have their own characteristics in the reinforcement of marble. The most ideal reinforcement material is stainless steel, which will not rust and has high reinforcement strength, but higher cost. Plastic rods are flexible substances,and the reinforcement strength is not enough when reinforcing some large-sized stones,slender stones, and heavy-quality stones. In these cases,plastic rods cannot be used for reinforcement. Steel rods is widely used for the stone reinforment from the cost and strength.But the problem is steel bar is easy to be rusted What is the main reason for the re-rust lesions of steel rods? 1. The iron reinforcement bars are eroded by water during stone processing, gradually oxidize and rust, and then migrate to the stone surface through the capillary pores of the stone to form regular rust spots. 2. After the stone is installed, the back reinforcement strip is eroded and rusted by the acid water vapor of the cement in the base of the stone, and migrates to the surface of the stone to form yellow rust spots. The rust caused by the iron rods cannot be completely controlled. Since the pollution source is inside the stone, the stone is eroded by acidic substances and water vapor in the base layer after installation. As the water vapor continues to rise, the pollutants continue to migrate to the surface of the stone to form stubborn rust spots, even if the stone is temporarily restored with rust removal products. Part of the surface is rusted, but the rusted back ribs of the pollution source may continue to rust. The rust spots caused by the iron rods cannot be completely rooted, so it is necessary to strictly control the installation process and the correct selection of materials when the stone is implanted into the reinforcement bars. In order to avoid adverse effects on the stone industry, try not to use iron rods, especially light-colored marble. For marble with many cracks on the surface, the slab must be sealed well. If the surface cracks are not repaired well, the steel will rust aft...
We are writing to share with you in advance that we will have National holiday from Oct,1st to Oct,7 th, will back to work from Oct, 8th. During this period, we may take longer than usual to reply to your messages. If not reply within 20 mins, please whatsapp or call at: +86-18559256353,+86-18050037212. If any order or inquiry plan, or any questions can be arranged in advance will be highly appreciated.Thank you. Below I'd like to share with you the photo of Famous tourist area in Xiamen ------ Gulang Island. Warmly welcome to enjoy your travelling here. Gulang Island is a pedestrian-only island off the coast of Xiamen. The island is about 2 km2 in area, about 20,000 people live on the island. Gulang Island is a major domestic tourist destination, attracting more than 10 million visitors per year, and making it one of China's most visited tourist attractions. Gulang Island not only bans cars, but also bicycles. The only vehicles permitted are small electric buggies and electric government service vehicles.Visitors can reach Gulangyu by ferry from the ferry terminal in Xiamen. Warmly welcome to enjoy your travelling here.
Material: Juparana Granite(China Juparana Granite,G261 Granite, Grey Jupara Granite) Origin:The China Juparana Grey Granite is a famous grey-color granite stone. This material origin from Hubei, province,China. Character:With Dense structure, hard texture, acid and alkali resistance&weather resistance.This material is in 2.82g/cm3 density, and the hardness also in a high degree too. The compress strength is big and very nice water absorption ability too. Surface Treatment: Polished, Honed, Leathered, Flamed The application of Juparana Grey Granite Stone Materials? The Juparana Grey Granite is a famous Chinese grey granite material. Same like other popular Chinese granite materials, this material with high quality and long time of use. At daily life, this material often used for indoor flooring tiles and outdoor wall facade cladding tiles use. Of course, the peoples also like to use it for other high-hardness request buildings too. As it is cheap price, then make it becomes very popular construction stone materials too. At the same time,we can use it to produce many types of indoor and outdoor stone products too. For example, there with a Juparana Grey granite countertop, vanity top, and tabletop. Of course, there are also Juparana Grey granite floor tiles and outdoor wall facade cladding tiles. Especially, we also can use it to produce stone sculpture products too. From Xiamen Excellent Stone,the chinese juparana grey granite countertop,stairs&risers and landing tiles, is especially popular in Ethiopia market,the hot sale sizes is 220x63x2cm with one long bullnose edge,stairs&risers sizes 125-220x34x3cm,125-220x15x2cm,landing tiles 40x40x1cm,door sill sizes 120-200x20-25x2cm,window sill sizes 120-200x25-30x3cm with one long side half bullnose. Juparana granite raw blocks are often in big sizes. That means we can cut it into big full slabs. Of course, there are also half slabs too. The big slabs in 240cm up by 120cm.In addition, the half slabs size in 180cm up by 60cm,70cm,80cm,etc. Juparana granite has a dense structure, hard texture, good acid and alkali resistance, and weather resistance, and can be used outdoors for a long time. The characteristics and advantages of granite also include high bearing capacity, compressive ability, and good grinding ductility. It is easy to cut and shape and can create thin plates and large plates. It is generally used for the floor, stairs and steps, bases, exterior wall cladding, etc. Here are some pics after installation for reference. How to buy China Juparana Grey Granite? We know that this material quarry is located in Hubei, China. In fact, raw stone blocks is popular around China. And it is very easy to buy raw materials and slabs or finished products from Xiamen and Shuitou both. In daily life, people can buy it depending on the project's request...
Countertops occupy a large proportion of stone products, and are an indispensable and important product for residential and commercial, as well as an important and indispensable product in high-end hotels and guesthouses. Since 16-20mm is the common thickness of large stone slabs, the countertops processed with this thickness of slabs lack of heaviness and three-dimensionality. Therefore, many countertops increase the thickness by strip lamination, so as to achieve better results. The kitchen countertop below is 20mm, and it is not difficult to see that the three-dimensional effect is very poor, very thin, and the decorative effect is not good; Decorative effect is better for laminated edges. However, the key and core technology of laminated countertop is the bonding seam. If the processing is not good and the level of seamlessness cannot be achieved, the processed countertop is worse than that without laminated, and it is better to make a 20mm countertop. Then, how to produce the seamless laminated countertop? Here 12 process to solve the problem. 1.The bottom side of the laminated countertop is not allowed to collapse. If the edge chipping will definitely affect the quality of the bonding joint. Checking quality of the bottom side of marble countertop 2.To avoid the chipping of the bottom side of the countertop by grinding; Griding the bonding area to increase the roughness and improve the adhesion between the countertop and the laminated strip. 3.The performance of the glue should be good enough, and the color of the glue is basically the same as the color of the stone to be bonded, or slightly lighter than the stone. If the performance and quality of the countertop bonding glue is poor, the color of the glue is not good or discolored, it will greatly affect the quality of the seamless countertop edge. Will be difficult for customers to accept. 4.Matching the color between the laminated strip and the countertop to make sure the color of the laminated strip is consistent with the countertop. 5. Checking whether the color, texture and gap of the laminated strip and the counter top are consistent or not before applying laminating glue. 6.To clean the bottom sied of countertop and make sure the laminated strip are clean and dry, so that the surface does not affect the bonding strength of the glue, and no dirt affects the effect of the bonding seam, then the bonding seam will not turn black or yellow. 7.The glue should be uniform and thin. Too thick or too little will affect the strength of the bond. 8.Gluing the laminated strip to the countertop. When bonding, in order to make the glue on top and the bonding strip uniform, move the bonding strip back and forth on the countertop to be bonded, so that the glue is fully mixed. 9.After bonding the adhesive strip to the countertop, ...
Gray natural marble stairs such as Hermes gray will make the overall color tone of the stairs more calm, connotative and unassuming. It's a more subtle color. This is also one of the more popular stone colors for glass railings and stairs. When gray natural marble is used as a staircase, the problem is much less than that of white natural marble, and there are basically few. Anti-fouling treatment is required, mainly because there are too many gaps in natural marble, such as natural water joints, and anti-fouling is very necessary. Mirror treatment after installation is also very necessary to deal with existing problems and prevent lesions. Ariston White natural marble is used for stone stairs, which is clean, simple and beautiful, giving people a pure and refreshing feeling, which is why many female customers like to make white stone stairs. However, the most important thing to pay attention to when making stone stairs from white natural marble is the anti-fouling and anti-alkali of the stone. During stone processing, it is necessary to apply antifouling treatment to the six sides of the stone for more than 2 times, and each time it needs to be dried before painting the next time. When installing the cement, white cement should be used instead of ordinary cement, which can effectively reduce the anti-alkali on the stone surface. The mirror treatment after installation is also very necessary, which can deal with the problems that have occurred and prevent them. Laminated dupont edge for stairs,while the skirting line is made of flat edge, which is simple and beautiful. Compared the hermes grey and ariston white marble stairs,which one is prefer to you? Welcome to send your inquiry for your next project.
© Copyright: 2024 XIAMEN EXCELLENT STONE CO.,LTD. All Rights Reserved.
IPv6 network supported